Products / Flat End Mills
Flat End Mills
Regular and long-neck micro flat end mills for general high-precision milling. Review the active product lines below, then move into the category-specific SKU table for dimensional comparison and feasibility screening.
ZENOK lines
14
Active micro SKUs
156
Diameter range
0.1–3.0 mm
Taiwan MFN
4.8%
Product Line Access
Review the active flat end mills product lines.
Only the product lines within this geometry family are shown here, so buyers can move from family-level selection to dimension review without cross-category noise.
ZF2
Flat End Mill · 2-Flute · Regular
2-flute regular flat end mill product line for core micro-machining programs and everyday high-precision features. Diameter 0.1 to 3 mm.
Flutes2
ConstructionB/C
SKUs14
ZF2-LN
Flat End Mill · 2-Flute · Long Neck
2-flute long neck flat end mill product line for deep micro features where reach and clearance are critical. Diameter 0.2 to 2.5 mm.
Flutes2
ConstructionB/C
SKUs61
ZF4
Flat End Mill · 4-Flute · Regular
4-flute regular flat end mill product line for core micro-machining programs and everyday high-precision features. Diameter 1 to 3 mm.
Flutes4
ConstructionB/C
SKUs5
ZF4-LN
Flat End Mill · 4-Flute · Long Neck
4-flute long neck flat end mill product line for deep micro features where reach and clearance are critical. Diameter 1 to 2.5 mm.
Flutes4
ConstructionB/C
SKUs17
Structured Catalog
Flat End Mills specification table
This table is filtered to the current geometry family only. Use search and line-level filters to compare dimensions, radii, overall reach, shank diameter, and B/C construction availability.
Standard production scope
Standard production covers tool diameters up to 3.0 mm and shank diameters below 6.0 mm. A 1/8 inch (3.175 mm) shank is handled as custom MOQ only.
Program status
Composite carbide-to-carbide programs outside the current B/C catalog are not in standard production and should be handled as special review only.
| Product family | SKU | Dia. | R | l | l1 | L | d | B / C |
|---|---|---|---|---|---|---|---|---|
| Flat End Mill · 2-Flute · Regular | ZF2-D0010 | 0.10 mm | — | 0.20 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0020 | 0.20 mm | — | 0.40 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0030 | 0.30 mm | — | 0.60 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0040 | 0.40 mm | — | 0.80 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0050 | 0.50 mm | — | 1 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0060 | 0.60 mm | — | 1.2 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0070 | 0.70 mm | — | 1.4 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0080 | 0.80 mm | — | 1.6 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0090 | 0.90 mm | — | 2 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0100 | 1 mm | — | 2.5 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0150 | 1.5 mm | — | 4 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0200 | 2 mm | — | 6 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0250 | 2.5 mm | — | 8 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Regular | ZF2-D0300 | 3 mm | — | 8 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0020-EL0100-LN | 0.20 mm | — | 0.30 mm | 1 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0020-EL0150-LN | 0.20 mm | — | 0.30 mm | 1.5 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0020-EL0200-LN | 0.20 mm | — | 0.30 mm | 2 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0030-EL0100-LN | 0.30 mm | — | 0.40 mm | 1 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0030-EL0200-LN | 0.30 mm | — | 0.40 mm | 2 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0030-EL0300-LN | 0.30 mm | — | 0.40 mm | 3 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0030-EL0400-LN | 0.30 mm | — | 0.40 mm | 4 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0040-EL0100-LN | 0.40 mm | — | 0.60 mm | 1 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0040-EL0200-LN | 0.40 mm | — | 0.60 mm | 2 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0040-EL0300-LN | 0.40 mm | — | 0.60 mm | 3 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0040-EL0400-LN | 0.40 mm | — | 0.60 mm | 4 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0040-EL0500-LN | 0.40 mm | — | 0.60 mm | 5 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0050-EL0200-LN | 0.50 mm | — | 0.70 mm | 2 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0050-EL0300-LN | 0.50 mm | — | 0.70 mm | 3 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0050-EL0400-LN | 0.50 mm | — | 0.70 mm | 4 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0050-EL0600-LN | 0.50 mm | — | 0.70 mm | 6 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0050-EL0800-LN | 0.50 mm | — | 0.70 mm | 8 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0050-EL1000-LN | 0.50 mm | — | 0.70 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0060-EL0200-LN | 0.60 mm | — | 0.90 mm | 2 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0060-EL0300-LN-S0400 | 0.60 mm | — | 0.90 mm | 3 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0060-EL0300-LN-S0400-XL2D0060E040 | 0.60 mm | — | 0.90 mm | 3 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0060-EL0400-LN | 0.60 mm | — | 0.90 mm | 4 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0060-EL0800-LN | 0.60 mm | — | 0.90 mm | 8 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0060-EL1000-LN | 0.60 mm | — | 0.90 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0070-EL0200-LN | 0.70 mm | — | 1 mm | 2 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0070-EL0400-LN | 0.70 mm | — | 1 mm | 4 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0070-EL0600-LN | 0.70 mm | — | 1 mm | 6 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0070-EL0800-LN | 0.70 mm | — | 1 mm | 8 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0070-EL1000-LN | 0.70 mm | — | 1 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0080-EL0200-LN | 0.80 mm | — | 1.2 mm | 2 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0080-EL0400-LN | 0.80 mm | — | 1.2 mm | 4 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0080-EL0600-LN | 0.80 mm | — | 1.2 mm | 6 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0080-EL0800-LN | 0.80 mm | — | 1.2 mm | 8 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0080-EL1000-LN | 0.80 mm | — | 1.2 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0100-EL0300-LN | 1 mm | — | 1.5 mm | 3 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0100-EL0400-LN | 1 mm | — | 1.5 mm | 4 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0100-EL0600-LN | 1 mm | — | 1.5 mm | 6 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0100-EL0800-LN | 1 mm | — | 1.5 mm | 8 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0100-EL1000-LN | 1 mm | — | 1.5 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0100-EL1200-LN | 1 mm | — | 1.5 mm | 12 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0100-EL1400-LN | 1 mm | — | 1.5 mm | 14 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0100-EL2000-LN | 1 mm | — | 1.5 mm | 20 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0150-EL0400-LN | 1.5 mm | — | 2.3 mm | 4 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0150-EL0600-LN | 1.5 mm | — | 2.3 mm | 6 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0150-EL0800-LN | 1.5 mm | — | 2.3 mm | 8 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0150-EL1000-LN | 1.5 mm | — | 2.3 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0150-EL1200-LN | 1.5 mm | — | 2.3 mm | 12 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0150-EL1600-LN | 1.5 mm | — | 2.3 mm | 16 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0150-EL2000-LN | 1.5 mm | — | 2.3 mm | 20 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0200-EL0600-LN | 2 mm | — | 3 mm | 6 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0200-EL0800-LN | 2 mm | — | 3 mm | 8 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0200-EL1000-LN | 2 mm | — | 3 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0200-EL1200-LN | 2 mm | — | 3 mm | 12 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0200-EL1600-LN | 2 mm | — | 3 mm | 16 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0200-EL2000-LN | 2 mm | — | 3 mm | 20 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0200-EL2500-LN | 2 mm | — | 3 mm | 25 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0250-EL1000-LN | 2.5 mm | — | 3.7 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0250-EL1200-LN | 2.5 mm | — | 3.7 mm | 12 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0250-EL1600-LN | 2.5 mm | — | 3.7 mm | 16 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0250-EL2000-LN | 2.5 mm | — | 3.7 mm | 20 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 2-Flute · Long Neck | ZF2-D0250-EL2500-LN | 2.5 mm | — | 3.7 mm | 25 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Regular | ZF4-D0100 | 1 mm | — | 2.5 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Regular | ZF4-D0150 | 1.5 mm | — | 4 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Regular | ZF4-D0200 | 2 mm | — | 6 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Regular | ZF4-D0250 | 2.5 mm | — | 8 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Regular | ZF4-D0300 | 3 mm | — | 8 mm | — | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0100-EL0600-LN | 1 mm | — | 1.5 mm | 6 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0100-EL0800-LN | 1 mm | — | 1.5 mm | 8 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0100-EL1000-LN | 1 mm | — | 1.5 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0100-EL1200-LN | 1 mm | — | 1.5 mm | 12 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0150-EL0800-LN | 1.5 mm | — | 2.3 mm | 8 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0150-EL1000-LN | 1.5 mm | — | 2.3 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0150-EL1200-LN | 1.5 mm | — | 2.3 mm | 12 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0150-EL1600-LN | 1.5 mm | — | 2.3 mm | 16 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0200-EL0800-LN | 2 mm | — | 3 mm | 8 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0200-EL1000-LN | 2 mm | — | 3 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0200-EL1200-LN | 2 mm | — | 3 mm | 12 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0200-EL1600-LN | 2 mm | — | 3 mm | 16 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0200-EL2000-LN | 2 mm | — | 3 mm | 20 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0250-EL1000-LN | 2.5 mm | — | 3.7 mm | 10 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0250-EL1200-LN | 2.5 mm | — | 3.7 mm | 12 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0250-EL1600-LN | 2.5 mm | — | 3.7 mm | 16 mm | 50 mm | 4 mm | BC |
| Flat End Mill · 4-Flute · Long Neck | ZF4-D0250-EL2000-LN | 2.5 mm | — | 3.7 mm | 20 mm | 50 mm | 4 mm | BC |